Understanding install day takes the guesswork out of the project. Most of artificial turf installation is about what sits beneath the turf: a solid base that drains and stays level. Here is how it works: we introduce Westminster homeowners to an independent local provider who runs the whole process, from cutting the first strip of sod to the final brushing.
Step One: Digging Out and Prepping
Day one typically begins with marking the turf area and finding sprinkler lines and buried utilities. Having utility lines marked before digging is routine. Next, the crew strips the existing grass, usually with a sod cutter, and digs out a few inches of soil so the finished turf sits level with walks and patios.
Then sprinkler heads inside the area get capped or pulled, and lines feeding nearby beds keep running. Low spots and drainage problems are fixed now, since grade is easiest to correct at this stage. The old sod and soil are hauled off.
Building the Base
The base is the foundation of the install. Crushed rock goes down in layers, is raked to grade and compacted with a plate compactor until firm and smooth. A gentle slope directs water away from the house toward a spot where it can drain.
Depending on the product and site, a weed barrier fabric may go under or over the base. Pet areas may get a base built to drain faster so rinse water clears quickly. A well compacted base is what prevents rippling, dips and puddles later.
Step Three: Laying, Seaming and Infill
Once the base is ready, the rolls are laid so all the blades lean one direction, which keeps the color uniform. Where pieces meet, the crew joins them with seam tape and adhesive, lining the edges up closely so the seam vanishes. Then the turf is trimmed to fit and fastened along the perimeter.
Infill is the final step. Sand or another infill is spread over the surface and worked into the fibers with a power broom. It weighs the turf down, helps the blades stand and shields the backing from sun. A last grooming leaves the yard ready to enjoy.
Before Install Day
A bit of prep keeps install day running smoothly: move furniture and toys out of the area, unlock the gates and tell the crew about pets and parking. Next, we introduce Westminster homeowners to an independent local provider who handles the install from start to finish, and you set the schedule with them directly.
